Vident iAuto702 Pro Jaguar XF 2010 Reset Oil Service: Yes or No?

Vident iAuto Scan Tool

Jaguar XF 2010 can reset oil service by Vident iAuto702 Pro???
The answer is Yes. Jaguar XF 2010 is covered.
vident-iauto702-pro-reset-oil-jaguar-xf-2010-1

Can you give me the resetting method?
It’s easy to operate, just follow the steps below.
Step 1: Connect iAuto 702 pro multi-application service tool to the vehicle
Step 2: Enter Application main menu -> Select OilReset V16.00
vident-iauto702-pro-reset-oil-jaguar-xf-2010-2
Step 3: Pay attention to the Oil service light reset prompt:
1. If the service lamp is on, you must provide service for the car. After service, you need to reset the driving mileage or driving time so that the service lamp turns off and the system enables the new service cycle.
2. After changing engine oil or electric appliances that monitor oil life, you need to reset the service lamp.
vident-iauto702-pro-reset-oil-jaguar-xf-2010-3
Step 4: Select car brand JAGUAR-> Software Reset-> Automatic Scan
vident-iauto702-pro-reset-oil-jaguar-xf-2010-4

vident-iauto702-pro-reset-oil-jaguar-xf-2010-5

vident-iauto702-pro-reset-oil-jaguar-xf-2010-6
Step 5: Switch on ignition
Step 6: Read out the current vehicle info
vident-iauto702-pro-reset-oil-jaguar-xf-2010-7
Step 7: Follow the operator message on the screen to operate:
1. This application will reset the oil service counter. This needs to be used when a vehicle has been serviced.
2. Make sure the key is in the ignition barrel and the ignition is switched off
3. The following steps (1-5) must be completed within 3 seconds or the reset procedure will not start:
1). Press and hold the rear fog lamp switch (Ignition off)
2). Cycle the ignition from off to on
3). Release the rear fog lamp switch
4). Press and hold the ‘trip’ button
5). Whilst holding the ‘trip’ button, press and hold the rear fog lamp switch
4. Set ignition switch to off/on
5. Read fault codes
6. If there are fault codes, it will show “System has fault codes”
vident-iauto702-pro-reset-oil-jaguar-xf-2010-8
7. Clear fault codes
vident-iauto702-pro-reset-oil-jaguar-xf-2010-9

vident-iauto702-pro-reset-oil-jaguar-xf-2010-10

8. Set ignition switch to off/on
Control module procedure completed with fault codes logged
vident-iauto702-pro-reset-oil-jaguar-xf-2010-11

VIDENT iAuto 702pro Jaguar Oil service light reset full car list:

Function Model Chassis Year
Oil service light reset JAGUAR F-TYPE As of 2014
Oil service light reset JAGUAR S-TYPE 2006-2008
Oil service light reset JAGUAR XF As of 2008
Oil service light reset JAGUAR XJ As of 2006
Oil service light reset JAGUAR XK 2010-2013
Oil service light reset JAGUAR XE As of 2016
Oil service light reset JAGUAR F-Pace As of 2017

Learn more special functions Jaguar vehicle models covered by iAuto 702 pro, refer to this article:

http://blog.videntshop.com/vident-iauto702-pro-jaguar-special-function-full-list-till-2019/

(Visited 33 times, 1 visits today)